Two Notes Torpedo C.A.B. M User Manual page 21

2019/04/04 16:57
4.3.3 IR loader
This mode is solely dedicated to third party IRs. The Torpedo C.A.B. M allows for the use of IRs which
are up to 200 ms long.
The interface of the IR Loader mode is similar to the Simulation mode. It differs only in the Miking
section. For a description of the other sections, see the Simulation mod description above.
4.3.3.1 Miking
The MIKING menu is where you will choose the IRs you want to use. Just like in simulation mode where
you can dual mike a cabinet, you will be able to select 2 IRs to be used at the same time.
Now that we have covered the 3 different modes of the C.A.B. M in the MENU environment, we will
look at the sections which are common to all 3 modes.
4.3.4 Level
4.3.5 Save
User's manuals - https://wiki.two-notes.com/
21/36
You have access to the Folder where you will
then select an IR. First you choose your folder
where you will be browsing the IRs you need.
Then the IR file you will use.
The next window will let you set levels, mute
and phase for each IR.
This parameter lets you set the level of the
preset.
It is independent of the output level (set in the
PERFORM environment), which is the same for
all presets and acts as a general, master level.
This section allows you to save a preset.
Torpedo C.A.B. M User's Manual