Two Notes Torpedo C.A.B. M User Manual page 10

Last
update:
torpedo_cab_m:torpedo_c.a.b._m_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_cab_m:torpedo_c.a.b._m_user_s_manual
2019/04/04
11:08
3. Connecting the Torpedo C.A.B. M
The Torpedo C.A.B. M finds its place either:
on your pedalboard, after a preamp, among your usual stompboxes
or between the amp and the speaker cabinet as an amp DI
or after a loadbox, for silent playing of your amplifier
To create a lightweight rig with a pedalboard, place the Torpedo C.A.B. M on your pedalboard knowing
that the best results are achieved by placing it before the time-based and modulation effects (chorus,
delay, reverb…), which then become brighter and clearer. This position also allows to take advantage
of the possible stereo of these effects. This is similar to the way things are done in the studio, where
modulations are often applied to guitar and bass tracks after recording.
To use the Torpedo C.A.B. M as an amp DI, place it after the power amp section of your amp by
connecting the speaker output of the your amp to the Amp Input of the C.A.B. M , and connecting
your cabinet to the Speaker Output of the pedal. (DISCLAIMER: The Torpedo C.A.B. M is not a
loadbox). Using the C.A.B. M this way ensures you to send your exact full guitar tone to the PA or an
audio interface to have the same quality studio-grade sound every single time you play.
The Torpedo C.A.B. M can also be used after a loadbox connected to your amplifier in place of the
speaker cabinet (such as the
Line Input of the C.A.B. M. This will provide a silent playing rig, where you can take fully advantage of
your amplifier's tone, without having to deal with sound level issues.
3.1 Using the C.A.B. M with pedals, preamplifier
https://wiki.two-notes.com/
Torpedo Captor). Simply connect the line output of the loadbox to the
Printed on 2019/04/04 16:57