Two Notes Torpedo C.A.B. M User Manual page 19

2019/04/04 16:57
4.3.2.2 Miking
The MIKING section is where you will choose your virtual cabinet and the two microphones to do the
miking.
You have access to 32 different cabinets and each cabinet can be miked with 2 of the 8 available
microphones for the given cabinet (Mic A and Mic B).
User's manuals - https://wiki.two-notes.com/
19/36
Type: Select how the tube is used, either in
triode or in pentode mode. Pentode mode has
more headroom and volume than triode.
Volume: Set up the output volume of your
virtual power amplifier.
Depth: This setting affects the tube stage
frequency (bandwidth).
Presence: This setting affects the tube stage
frequency (loudness).
First you choose your cabinet.
Then the 2 microphones you will use.
The next window is where you set levels, mute
and phase for each microphone.
Note: all the microphone in all the Two notes
Virtual Cabinets are already captured in phase
with each others, so the Phase parameter is not
needed to correct the relative phase of the two
microphones. This parameter can rather be used
to get a specific out-of-phase effect, or correct
the phase between the C.A.B. M microphones
and an external signal.
The following window shows you how the mics
are placed in regards of the cabinet, and this
part will let you do the mic placement for each
microphone with the following sequence of
parameters.
Torpedo C.A.B. M User's Manual