Menu Contents; Setup Menu - Sony DSR-1600.GB Operating Instructions Manual

Sony corporation digital videocassette player operating instructions dsr-1600.gb
Table of Contents

Advertisement

Menu Contents

Setup Menu

The purpose and settings of the setup menu items are
described below.
Indications of menu items and settings
• In the table below entitled "Menu contents," the
indication of each menu item or setting on the monitor
screen is shown first, then the indication of the same item
or setting in the time counter display of this unit is shown
in square brackets ([ ]).
Menu contents
OPERATIONAL FUNCTION [Operational]: Operation
settings
REPEAT FUNCTION [>REP
FUNC]: Make settings for
repeat playback mode.
LOCAL ENABLE [> Local ENA]: Select which of the tape
transport control buttons (EJECT, REW, PLAY, F FWD, and
STOP) operate when the REMOTE button is lit.
SEARCH ENABLE [>Search ENA]: Select how the unit enters
the search mode.
40
Menu Contents
REPEAT MODE
[>>REPEAT MD]:
Determine whether or
not to put the unit into
repeat playback mode.
REPEAT TOP [>>REP
TOP]: Determine
whether the repeat
start point is the
beginning of tape or
point A.
REPEAT END [>>REP
END]: Determine
whether the repeat end
point is the end of the
video recorded portion,
the end of tape or point
B.
A PRESET [>>A preset]:
Specify a time code
value to be used as the
setting of point A.
B PRESET [>>B preset]:
Specify a time code
value to be used as the
setting of point B.
Examples:
Indication on monitor
screen
OPERATIONAL FUNCTION
CASSETTE OUT
*
X32
• Settings preceded by an asterisk (such as *
factory default settings.
• In the time counter display, one to three ">" symbols
may precede item or setting indications depending on the
current menu level. Larger numbers of ">" symbols
indicate lower menu levels.
Description of settings
*OFF [>>> OFF]: Do not put the unit into repeat playback
mode.
ON [>>> ON]: Put the unit into repeat playback mode.
ON (FREEZE) [>>> FREEZE]: Put the unit into freeze
playback mode. In this case, while the unit is cueing up to
the repeat start point, the freeze picture of the repeat end
point is displayed.
*TAPE TOP [>>>Tape top]: The repeat start point is the
beginning of tape.
A POINT [>>>A point]: The repeat start point is point A as set
by the user.
*VIDEO END [>>>VD end]: The repeat end point is the end
of the video recorded portion.
TAPE END [>>>Tape end]: The repeat end point is the end of
tape.
B POINT [>>>B point]: The repeat end point is point B as set
by the user.
For details, see "Setting Points A and B for Repeat Playback"
on page 25.
For details, see "Setting Points A and B for Repeat Playback"
on page 25.
ALL DISABLE [>> All DIS]: All of the tape transport control
buttons are disabled.
*STOP & EJECT [>> STOP & EJ]: Only the STOP and
EJECT buttons are enabled.
ALL ENABLE [>> All ENA]: All of the tape transport control
buttons are enabled, and settings such as preroll time
change or time data display selection are effective.
*DIAL DIRECT [>> DIAL]: Press the SEARCH button or,
except during editing, turn the search dial.
VIA SEARCH KEY [>> via KEY]: Press the SEARCH button.
Indication in time counter
display
[Operational]
[>> Cass. out]
[>>> X32]
) are
X32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsr-1600Dsr-1600r

Table of Contents