Remote Button - Sony DSR-1600.GB Operating Instructions Manual

Playback modes using the search dial
Playback mode Operation and functions
Shuttle Press the SEARCH button or the search
dial so that the SHUTTLE indicator in
the display section lights, then turn the
search dial.
Playback is carried out at a speed
determined by the position of the search
dial. The maximum shuttle mode
playback speed can be changed with the
SHUTTLE menu item (see page 41) .
Jog Press the SEARCH button or the search
dial so that the JOG indicator in the
display section lights, then turn the
search dial. Playback is carried out at a
speed determined by the speed of
rotation of the search dial. The playback
speed is up to
factory default.
The search dial has no detents.
You can use the SEARCH ENABLE menu item (see page
40) to select either of the following as the operation to be
performed to put the unit into search mode (shuttle or jog).
• Either press the SEARCH button or turn the search dial
(factory default setting).
• Press the SEARCH button.
E Remote control setting section
a REMOTE button
When remote-controlling this unit from the unit connected
to the REMOTE connector or
press this button, turning it on.
When reverting to local mode to use the buttons in the tape
transport control section, press this button again, turning it
off.
b 9PIN button
When carrying out remote control between this unit and
the unit connected to the REMOTE connector, press this
button, turning it on.
c i.LINK button
When carrying out remote control between this unit and
the unit connected to the
±
1 times normal speed by
a REMOTE button
b 9PIN button
c i.LINK button
DV IN/OUT connector,
DV IN/OUT connector, press
this button, turning it on. This requires the optional DSBK-
1803 board to be installed.
Location and Function of Parts
13