Changing Menu Settings; Changing The Set Up Menu Settings; Menu Contents - Sony DSR-40 Operating Instructions Manual

Changing Menu Settings

Changing the SET UP MENU Settings

Menu Contents

Menu options
LOCAL ENABLE
RS-422 CUE-UP MODE
This VCR has various functions available, and you can set and check them
on the monitor screen. Before operation, set the clock by setting the
CLOCK SET menu.
You can change the menu settings on the SET UP MENU screen.
If necessary, change the settings manually.
Follow the instructions below to change the settings.
1
Press MENU.
The SET UP MENU appears on the monitor screen.
SET UP MENU
LOCAL ENABLE
RS-422 CUE UP MODE
AUTO OFF
AUTO REWIND
INDEX WRITE
CASSETTE MEMORY SEARCH
CASSETTE MEMORY ERASE
SELECT
2
Press ˘/≥ to select the option you want to change, and press SET.
Each menu option appears on the monitor screen (see the table below).
3
Press ˘/≥ to change the setting, and press SET.
The menu disappears from the monitor screen.
To cancel the menu settings, press MENU again.
Initial settings are indicated in bold letters.
Set this option to Description of settings
ALL DISABLE • When the REMOTE/LOCAL switch is set to REMOTE, all of the tape
transport control buttons (front panel/remote control unit) are
disabled.
STOP & EJECT
• When the REMOTE/LOCAL switch is set to REMOTE, only the STOP
and EJECT buttons (front panel/remote control unit) are enabled.
EJECT
• When the REMOTE/LOCAL switch is set to REMOTE, only the
EJECT button (front panel) is enabled.
WITH VIDEO
• While searching with equipment connected to the REMOTE
connector, the searching picture is displayed.
WITHOUT VIDEO
• Does not display the searching picture. (The searching speed will be
faster than when set to WITH VIDEO.)
& SET END MENU
51
Chapter 5 Menu Settings
GB