Advertisement
a). "PROD/
an ordinary remote control unit.
b). "ADJUP/ADJDOWN" is used to turn pages upward and downward. It
works only in "B/W BALANCE", "ADJUST" and "SETUP" mode. It has
the same function as what the ordinary remote control "POS+" / "POS-"
button has in "B/W BALANCE", "ADJUST" and "SETUP" mode.
c). "ADJ+/ADJ-" is used to increase/decrease adjustment of options selected.
It works only in "B/W BALANCE", "ADJUST" and "SETUP" mode. It
has the same function as what the ordinary remote control
"VOL+"/"VOL-" button has in "B/W BALANCE", "ADJUST" and
"SETUP" mode.
d). "POS+" and "POS-" are used for channel switch only. "LINE" works only
in "B/W BALANCE" mode.
e). Please refer to description in (4-4) for functions of other buttons.
6. Special functions
6-1. Magic function of "DISPLAY/
"DISPLAY" button can be used to cancel OSD display. This can be applied to
practical operation to simplify operation.
1). The fixed OSD display of "FACTORY", "BUS OPEN", "B/W BALANCE",
"ADJUST" and "MUTE" can not be cancelled by pressing "DISPLAY" button.
2). In "B/W BALANCE" mode, the OSD of adjusting options can not be cancelled
by pressing "DISPLAY". In other OSD status of "B/W BALANCE" mode,
press "DISPLAY" can return to the OSD of adjusting options.
3). In "ADJUST" mode, press "DISPLAY" button can not cancel the OSD of
adjusting options. In other OSD status of "ADJUST" mode, press "ADJUST"
button can return to the OSD of adjusting options.
4). In "SETUP" mode, press "DISPLAY" button can not cancel the OSD of
adjusting options. In other OSD status of "SETUP" mode, press "DISPLAY"
button can return to the OSD of adjusting options.
5). In other OSD display modes, press "DISPLAY" button can cancel the current
OSD and return to non-OSD mode.
6-2. Auto-search function
This function is available when "SEARCH CHECK" is set to "1". This
function can check automatically if program positions are stored in EEPROM. If
" has the same function as that of the "PROD/
" button
" button on
Advertisement
