Advertisement
In CHANNEL menu press (0~9) and (--) buttons to select the positions to be
copied.
In AV mode press (0 9) or (- -) buttons do not work, but AV display will appear.
During B/W balance adjustment in one light line mode, press numeric buttons
(0~7) can adjust sub-brightness, red bias, green bias and blue bias. "8", "9"
and "--" buttons do not work.
3) OSD display about 5 seconds
note waiting for the unit's digit
4 4. POS
, POS /
1) Function
move program position upward or downward by 1 select options in a menu
select adjusting options play games.
2) Description
Press POS /POS to change program positions. Automatically skip off the
position of "REMEMBER OFF".
Press and hold this button for more than 1second, the position will increase or
decrease by 1 for each 800ms.
If all program positions are in "MEMORY OFF " status, then press POS
POS
buttons can only select the program in "0" position. If only one
position is in MEMORY ON" status, then press POS
select the only program in the position of "MEMORY ON".
After reaching the maximum position stored, press the POS
return to the minimum position stored After reaching the minimum
position stored, press the POS
position stored.
After switch is finished, the information of the current position and the last
position will change. The result will be stored in EEPROM automatically.
Auto mute and black background functions are enabled during program switch.
In full-screen menu, POS and POS
2
AUTO
D/K
+,
- remote control, local buttons
2
button again will return to the maximum
buttons are used to select from top to
and
POS
buttons can
button again will
Advertisement
