Advertisement
with an arrow and its OSD display will become red. The OSD display of
the options not selected is in green.
"EXCHANGE" is to exchange the memory information of the current channel
with that of the target channel; "CLEAR ALL" is to close all the memory
of position storing channel information, that means no program is stored.
When "EXCHANGE" is selected the position displayed first is the current
position. Key in position with "--" and "0~9" buttons and press VOL+ or
VOL- to start. After exchange is finished, channel menu will quit
automatically. The program played by the current position will
automatically become the program directed by the memory information of
the former target position.
If "CLEAR ALL" is selected, press and hold VOL+ or VOL- button for 2
seconds to start. During the operation, OSD display will show
"CLEARING ALL..." for attention. When CLEAR ALL is completed,
program position will jump to "0" automatically.
If no operation is performed within 1o seconds, CHANNEL menu will quit
automatically.
6). CHANNEL menu OSD display (about 10 seconds)
4-11. AUTO (local button)
1). Function to start auto-search mode directly.
2). Instruction
Press AUTO button to start auto-search mode directly.
In auto-search mode, press MENU or AUTO button to stop auto-search.
When auto-search is finished, the picture status will be set to STANDARD
automatically, and the sound output is set to"15".
During auto-search, the positions searched will be stored in EEPROM
automatically from position"0". When the amount of programs searched
exceeds the max position allowed, auto-search will stop. If the amount
of programs searched do not reach the max position allowed, the
program positions not stored will be set to "REMEMBER OFF " after
CHANNEL
EXCHANGE
10
CLEAR ALL
-
Advertisement
