xDEEP Stealth 2.0 User Manual page 3

2 CE certification
The products described in the following instruction have been a subject of certification in a recognized unit and
meet the requirements of 89/686/EWG directive and of the norm EN1809:2001, synchronized with this
directive, in its full extent; and of EN 250:2003 covering scuba harness.
The compatibility assessment of STEALTH TEC buoyancy compensator and STEALTH side mount harness has
been conducted by:
Polski Rejestr Statków S.A.,
Recognised certification unit nr 1463
Al.Gen.Józefa Hallera 126
80-416 Gdańsk
Poland
STEALTH 2.0 TEC buoyancy compensator has been certified as compatible with 89/686/EWG directive, as far as
it contains air compatible with EN 12021 norm. Regarding the lack of EN norms for safety requirements while
the use of it takes place with mixtures of higher oxygen content, the above mentioned buoyancy compensator
cannot be regarded as one which has been a subject of CE certification with gas mixtures with oxygen level
higher than 21% (+/- 2%) as stated in 89/686/EWG directive.
In non-EU countries additional conditions, law requirements and buoyancy compensator norms may exist.
Double check the current requirements in the country in which you intend to use it.
The buoyancy compensator is not a safety jacket: it does not guarantee a proper head-up position on the
Warning!
Warning!
surface.