Adjusts the overall image and background screen brightness.
To enter the ECO MODE, press the "INPUT/RESET" button.
ECO MODE OFF: Sets brightness variable from 0% to 100%.
ECO MODE1: Sets brightness 80%.
This setting automatically adjusts brightness within a power consumption range that meets Energy Star measurement
ECO MODE2: Sets brightness 40%.
This setting can adjust brightness within the range that power has reduced 45% from maximum brightness setting.
NOTE: When DV MODE is ON, ECO MODE is set to OFF and cannot be changed.
Adjusts the image brightness in relation to the background.
To enter the DV MODE setting, select CONTRAST icon and set DV MODE to OFF then touch the "INPUT/RESET" key.
DV MODE: Setting that adjusts the brightness by detecting the screen's black areas and optimizes it.
NOTE: "OFF" is used for TCO Certificate compliance.
AUTO CONTRAST (Analog input only)
Adjusts the image displayed for non-standard video inputs.
AUTO ADJUST (Analog input only)
Automatically adjusts the Image Position, the H. Size and Fine setting.
LEFT/RIGHT (Analog input only)
Controls Horizontal Image Position within the display area of the LCD.
DOWN/UP (Analog input only)
Controls Vertical Image Position within the display area of the LCD.
H. SIZE (Analog input only)
Adjusts the horizontal size by increasing or decreasing this setting.
FINE (Analog input only)
Improves focus, clarity and image stability by increasing or decreasing this setting.
COLOR CONTROL SYSTEMS
Five color presets (9300/7500/sRGB/USER/NATIVE) select the desired color setting.
Increase or decreases Red. The change will appear on screen.
Increase or decreases Green. The change will appear on screen.
Increase or decreases Blue. The change will appear on screen.
Selecting TOOL allows you to get into the sub menu.
Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings. The INPUT/RESET
button will need to be held down for several seconds to take effect. Individual settings can be reset by highlighting the
control to be reset and pressing the INPUT/RESET button.
Selecting EXIT allows you exit OSD menu/ sub menu.
OSD control menus are available in nine languages.