Configuration & Assembly - Pelsue LG5 Series Product Manual

3.0 - Configuration & Assembly
Upon initial receipt of the Manhole Guard Retrieval System inspect the packaging for any evidence that the product may
have been damaged in shipment. While unpacking the product, inspect all of the components for damage. If damage
to any of the components is discovered, DO NOT USE THE PRODUCT! Alert the shipping carrier immediately of the
damage to the shipment.
ITEM# PART#
LG5-TA 500909-001
1. P102
2. P025
LG5-GA 500885-001
LG5-TA FOLDED ORIENTATION
LG5-GA FOLDED ORIENTATION
Verify that all parts are present before completing assembly.
The Carabiner and Pulley will not be installed on the upper assembly upon receipt. To fully assemble the upper sec-
tion,
1. Secure the Screw Lock Carabiner (#1) to a Swivel Eye located on the Hub of the upper section by unscrewing the
screw lock on the Carabiner, and hooking through the Swivel Eye.
2. Hook the Cable Ready Pulley (#2) onto the Carabiner (#1) and fully tighten the Screw Lock on the Carabiner.
**Refer to parts list above if replacement parts are required. Replacement parts can be ordered from the T.A. Pelsue
Company at 800-525-8460.
Page 8
DESCRIPTION
LG5 UPPER SECTION
CARABINER - GALVANIzED STEEL, SCREW LOCk
PULLEY - CABLE READY, 2-1/2" TREAD, ALUMINUM
LG5 LOWER SECTION
Figure 3.0: #LG5 Series
Configuration Diagram
#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
1
2
LG5-TA DEPLOYED ORIENTATION
LG5-GA DEPLOYED ORIENTATION