Page 1
Part #500995-001 Product Manual: #LG5 Series Manhole Guard Retrieval System IS O 9 0 0 1 Certified T.A. Pelsue Company 2500 South Tejon Street Englewood, Colorado, USA 80110 Tel. 800-525-8460 or 303-936-7432 Fax. 303-934-5581 Internet: www.pelsue.com Email: sales@pelsue.com...
Page 2
Page 2 #500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018...
Page 3
Pelsue continues the dedication that industry throughout the world. has made us pre-eminent in this field. Page 3 #500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018...
EVERY T.A. PELSUE COMPANY EMPLOYEE IS ExPECTED TO COMMIT TO THIS PHILOSOPHY IN THE PERFORMANCE OF HIS OR HER DAILY TASkS. QUALITY FIRST! T.A. PELSUE COMPANY SENIOR MANAGEMENT TEAM Page 5 #500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018...
2.0 - Introduction & Product Information Congratulations on your choice of a Pelsue Model #LG5 Manhole Guard Retrieval System to compliment your con- fined space entry/retrieval operation. This equipment has been designed and manufactured to exceed confined space requirements and regulations in order to meet the needs of the discriminating operator for the efficient and safe entry or retrieval of personnel from a confined space.
2. Hook the Cable Ready Pulley (#2) onto the Carabiner (#1) and fully tighten the Screw Lock on the Carabiner. **Refer to parts list above if replacement parts are required. Replacement parts can be ordered from the T.A. Pelsue Company at 800-525-8460.
4.0 - Safety The following section will address the safety precautions which must be adhered to when working with Pelsue confined Space Safety equipment such as the #LG5 Series Manhole Guard Retrieval System. Any user must familiarize them- selves with the information in this section before utilizing the equipment.
Securely anchor the product before using. Use only certified anchor and connector components in your system. Use only an approved full body harness for the workers. Page 11 #500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018...
4.6 - New Operator or Owner The Pelsue #LG5 Series Manhole Guard Retrieval Systems are designed to assist a person/entrant in entering a con- fined space and assist in exiting if required. Every new operator must read, understand and follow the instructions in the manual.
5.0 - Product Operation The following section will address the capabilities and the general operation of the Pelsue #LG5 Series Manhole Guard Retrieval System. The instructions contained within this section should be adhered to each and every time the product is used.
#LG5 Guard System. • #LG5 Series are only to be utilized within the guidelines and ratings presented in this manual and only by personnel who are trained in the operation of this equipment as well as the practices of general confined space safety.
Page 15
Figure #5.2e: #LG5 Series Figure #5.2d: #LG5 Series damage to the product and injury to Completely Installed. Upper Section Installed. the operator. Page 15 #500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018...
If any fasteners have appeared to “back-out” or loosen the product should be removed from service until the problem can be identified and corrected. Page 17 #500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018...
Page 18
Also, the locking bar is a load-bearing component of the LG5 system. The locking bar must be able to be fully lowered and locked into place for product compliance. Page 18 #500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018...
2. Perform a complete inspection of the unit and document the results prior to storage. 8.0 - Accessories This section of the product manual will address optional accesories available from Pelsue for the LG5 Series System that can extend the capabilities of the system in various applications 8.1 - LGL-B Mounting Bracket...
Page 22
8.1 - LGL-B Mounting Bracket (continued) Installation of the Hoist to Adapter (Part 2): Note: The #LGL-B accessory will accept any Pelsue PH Series hoist that is outfitted with a standard quick-release bracket a. Before installing the hoist, ensure that the LG5 system is assembled correctly.