Maintenance Safety - Pelsue LG5 Series Product Manual

4.4 - Operating Safety (continued)
7.
Always work in teams. One person is to work in the confined space (entrant) and the other is to attend to the entrant
(attendant). Pelsue recommends an additional attendant/rescuer for stand-by in case of an emergency.
8.
Do not exceed the capacity of the system at any time (see section 5.1).
9.
Establish a regular training program for new and experienced workers.
10. Establish a detailed inspection program for your equipment and document the findings. Return the equipment to
the manufacturer for repair if any problems are found.
11. Plan your work program before starting. Have the required people, equipment and procedures available to do the
job.
12. Do not use the equipment around physical or environmental hazards. This list includes but is not limited to:
• Corrosion that may affect the structural integrity of the lifeline or other components.
• Chemicals which can degrade components in a manner which can not be visually identified.
• Toxic gases: Rescuers or workers can be killed in toxic environments.
• Heat or elevated temperatures.
• Moving machinery: Workers or auxiliary equipment can be contacted by or pulled into moving components.
• Sharp edges: Workers or the rescue equipment can be injured by or damaged by sharp edges or components.
• Electrical hazards: Stay away from power lines or components carrying electrical power.
• Overload: Do not overload the system at any time during operation (see section 5.1).
• Follow confined space regulations and standards.

4.5 - Maintenance Safety

1.
Read, understand and follow the User Manual and signs on the product before using, maintaining or inspecting the equip-
ment.
2.
ANSI and OSHA require a regular inspection program for all confined space entry/retrieval equipment and to main-
tain documented results of these inspections. Follow the inspection procedure contained in this manual and use
the inspection form to document the results (see section 6.0).
3. keep instructional and safety signs clean and legible at all times. Clean or replace as required.
4.
Remove the equipment from service if a problem is found during the inspection. Return to an authorized repair depot
or the factory for service.
4.6 - New Operator or Owner
The Pelsue #LG5 Series Manhole Guard Retrieval Systems are designed to assist a person/entrant in entering a con-
fined space and assist in exiting if required. Every new operator must read, understand and follow the instructions in the
manual. No one should be allowed to use the equipment without training. The training should be reviewed with experi-
enced operators on a regular basis. At regular intervals, perform a detailed inspection of the equipment and document
the results. Remove from service if deficiencies are found. Alterations or misuse of this equipment or failure to follow
instructions may result in serious injury or death.
It is the responsibility of the owner's organization or operator to read this manual and to train all other operators before
they start working with the equipment. Follow all safety instructions exactly. Safety is everyone's business. By following
recommended procedures, a safe working environment is provided for the operator, bystanders and the area around
the work site. Untrained operators are not qualified to operate the equipment.
Many features incorporated into this equipment are the result of suggestions made by customers like you. Read this
manual carefully to learn how to operate the equipment safely and how to set it to perform as intended. By following the
operating instructions in conjunction with a good maintenance program, your product will provide many years of trouble
free service.
Page 12
#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018