Storage; Accessories - Pelsue LG5 Series Product Manual

Prior to storage, the product should be thoroughly inspected and maintained. Repair or replace any worn or damaged
components to prevent any unnecessary down time at the next use.
Follow this procedure:
1. Thoroughly clean the entire unit using a mild soap on the frame and labels.
2. Perform a complete inspection of the unit and document the results prior to storage.
This section of the product manual will address optional accesories available from Pelsue for the LG5 Series System
that can extend the capabilities of the system in various applications
The hoist mounting accessory, inclusive of a Mounting Platform and standard Hoist Bracket comes standard with the
LG5 Series system. This accessory provides full retrieval capabilities to the LG5 Series System
Installation of the Hoist Mounting Parts (Part 1):
Installation of the hoist or retrieval system should be performed prior to usage in an area not subject to fall hazard. Once
installed, the platform and bracket can remain on the unit indefinitely, the upper assembly can be stowed with the hoist
adapter installed.
a. First choose desired leg for hoist mount location.
b. Fasten the hoist mounting platform with the
necessary hardware (Refer to Fig #8.1a).
c. Then fasten the hoist bracket on to the mounting
platform (Refer to Fig #8.1b).
3
Figure #8.1a
Mounting Platform Installation
#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
6
2
5
8.1 - LGL-B Mounting Bracket
ITEM# PART#
1. 500101-002
2. 500890-001
3. 100163-015
4. 100163-009
5. 107943-001
6. 100050-011
4
6
Hoist Bracket Installation

7.0 - Storage

8.0 - Accessories

DESCRIPTION
WELDMENT - HOIST BRACkET
MOUNTING PLATE
3/8"-16 X 2-3/4" BOLT
3/8"-16 X 1-1/4" BOLT
3/8"-16 STOVER LOCKING NUT
FLAT WASHER - 3/8"
1
5
Figure #8.1b
Page 21