Installing The Speakers On A Wall - Sony 3-283-028-11(1) Operating Instructions Manual

Installing the Speakers on
a Wall
You can use the speakers by installing on the
wall.
Installing the speakers on a
wall
1
Prepare screws (not supplied) that are
suitable for the hole on the back of
each speaker. See the illustrations
below.
3
30 mm (1 / inches)
16
5 mm
7
( / inch)
32
10 mm
13
( / inch)
32
2
Fasten the screws to the wall.
For the center speaker
7 to 9 mm
9 3
( / to / inch)
32 8
5
4 mm ( / inch)
32
Hole on the back of
the speaker
160 mm
5
(6 / inches)
16
For the other speakers
6 to 9 mm
1 3
( / to / inch)
4 8
3
Hang the speakers on the screws.
Rear of speaker
Note
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
5 mm
7
( / inch)
32
10 mm
13
( / inch)
32
17
GB