• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
Set this between –6.0 dB and
0.0 dB
0.0 dB.
[CENTER]
Set this between –6.0 dB and
0.0 dB
+6.0 dB.
(appears when you
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
[SUBWOOFER]
Set this between –6.0 dB and
0.0 dB
+6.0 dB.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
Set this between –6.0 dB and
0.0 dB
+6.0 dB.
(appears when you
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
To adjust the volume of all the
speakers at one time
Turn the VOLUME control on the unit, or press
VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
GB