Alarm Function - Bresser 70-50200 Instruction Manual

SELECT DISPLAY moDE
• Hours : Minutes : Seconds
• Hours : Minutes : Weekday
• Hours : Minutes : Weekday of the time zone
• Hours : Minutes : Seconds of the time zone

4.8 ALARm FUNCTIoN

There are 3 alarms available on the main unit:
• Weekday alarm
The alarm sound will be activated and the icon will flash
on weekdays (Mo-Fr) when it is armed and the alarm
time is reached.
• Single alarm
The alarm sound will be activated and the icon will flash
when it is armed and the alarm time is reached. Once it
finished, it will be disabled automatically!
• Pre-Alarm
The pre-alarm will be activated and the icon will flash if
the temperature of channel 1 is falling to +0 ºC or below.
It is programmable 15, 30, 45, 60 or 90 minutes earlier
than the weekday alarm or single alarm time.
4.8.1 ACTIVATING / DEACTIVATING AN ALARm
1. Press ALARM to rotate between:
• Weekday Alarm Time (displays OFF if weekday alarm
deactivated)
• Single Alarm Time (displays OFF if single alarm
deactivated)
• Pre-Alarm Time (displays OFF if pre-alarm deactivated)
2. 2. When the above alarms are displayed, pressing
will activate, pressing  will deactivate the corresponding
alarm (OFF).
GB
41