Max/Min Memory; Manual Time And User-Defined Settings - Bresser 70-50200 Instruction Manual

GB
4.5 DISPLAYING ThE TEmPERATURE FRom ThE
REmoTE SENSoR
Static Display: Press the CHANNEL button to select meas-
urements from different remote sensors (channel 1, 2 or 3).
Channel Auto-Scan Display: To enable an automatic scan
of all present channels, press and hold CHANNEL button
until the icon is displayed. The measurements from each
remote channel will be alternately displayed with a 5 sec-
onds viewing.
NoTE!
The channel auto-scan feature can be activated only if there
are more than one remote sensors operating and are set to
different channels.
4.6 VIEWING mAX/mIN READINGS
Press the MEM button to read the minimum temperature
of all sensors (indoor and remote) with the MIN, next MEM
press the maximum values with the MAX icon and then back
to the current values.
4.6.1 RESETTING mEmoRIES
Press and hold the MEM button for 3 seconds to clear all
max/min memories.

4.7 mANUAL TImE and USER-DEFINED SETTINGS

To set the clock manually, make sure that the display shows
the normal time (not the ZONE time). You can change the
time display by a simple push on the MODE button. After
39