Fuel Door Release - Mazda CX-9 2010 Smart Start Manual

Feature Highlights
SPORT A/T MANUAL SHIFT MODE
The Sport A/T Manual Shift Mode gives you the
feel of driving a manual transmission by allowing
you to manually shift to control engine rpm and
torque when more control is desired.
To Use Manual Shift Mode:
• Shift lever from D to M.
NOTE:
Changing to manual mode
can be done while driving the vehicle.
To Shift Up to a Higher Gear:
• Tap shift lever back (+) once.
To Shift Down to a Lower Gear:
• Tap shift lever forward (-) once.
The transmission will automatically adjust how and when it shifts gears
based on road conditions and your driving style. The transmission may stay
in a lower gear longer than usual when going up or down hills or driving
around corners. This feature gives you better control and a more connected
driving experience.
Fuel Door
To avoid scratching the paint during
refueling, secure the fuel ller cap
tether over the hook as shown.
11
Lower
Gear
Higher
Gear

FUEL DOOR RELEASE

(located on oor inside driver's side door)
To open, pull the remote fuel
door release.
NOTE:
Fuel requirement 87 Octane.
AUTO-DIMMING MIRROR AND HOMELINK
HomeLink Auto-Dimming Rear
Indicator Light Light
Sensor
On Off
Auto-Dimming Mirror
• Auto-dimming will automatically darken your rearview mirror to reduce
headlight glare from vehicles behind you.
• Auto-dimming is activated every time the vehicle is started.
NOTE:
In addition to the auto-dimming mirror's rear light sensor, there is also a
front light sensor (not shown). Do not place or hang any objects over the front or rear
mirror light sensors; otherwise, the auto-dimming mirrors will not operate properly.
HomeLink
®
• This feature provides a convenient way to replace up to three
transmitters such as garage door openers, home lighting remotes
and other radio frequency devices.
• Refer to your Owner's Manual for complete programming details.
ALUMINUM WHEEL CARE
Your aluminum wheels have a protective
coating on them. Only use a mild soap
or neutral detergent with a sponge or
soft cloth to clean them. Using a wire
brush, polishing compound, solvent,
or any type of abrasive cleaner may
damage the protective coating.
®
Auto-Dimming Auto-Dimming
On Off
12