Mazda CX-9 2010 Smart Start Manual page 3

Hide thumbs Also See for CX-9 2010:
Table of Contents

Advertisement

Seats
ELECTRONICALLY OPERATED SEAT W/MEMORY
Recline Switch
Push forward or backward
to adjust seatback angle.
Slide/Tilt Switch
Seat can be moved back
and forth, raised, lowered,
or tilted with this control.
Memory Seat Switch
To Program the Driver's Seat Position
1
Park the vehicle.
2
Adjust the seat to the desired position using the slide/tilt and
recline switches.
3
Push the memory seat SET button followed by one of the programming
buttons (1-3) until a beep is heard. Programming is now complete.
Program the remaining two buttons as desired.
NOTE:
You can also program a seat position for each advanced key/retractable type
key used with the vehicle. See Owner's Manual for programming instructions.
To Move the Seat to a Programmed Position
1
Shift the selector lever to the P position.
2
Push the programming button (1-3) that you selected when
programming your seat position.
3
Lumbar Switch
Push forward or backward to increase or
decrease lumbar support.
SPLIT FOLDING THIRD-ROW SEAT
To create a at luggage compartment
space, fold the seatbacks forward.
1
Open liftgate.
2
Lower head restraints.
3
Pull each strap on the rear of
the seat while pushing the left
and right seat forward to lay at.
To Return to the Original Position
Pull the strap to return the seatback to the original position.
THIRD-ROW SEAT ACCESS
• Pull the third-row seat access lever on the
side of the second-row seatback to fold
and slide the seat forward to access
third-row seating.
• Return the second-row seatback to the
normal upright position by pulling up on
the seatback until it locks into place.
• Slide the second-row seat forward or back
for proper legroom using the lever under
the front of the seat.
SECOND ROW SEATBACK RECLINE
To recline the seatback, lean forward slightly while folding lever. Then lean
back to the desired position and release the lever.
FOLDING THE SECOND-ROW SEATS
1
Unfasten the lap portion of the center-rear seat belt.
2
Slide seat all the way back toward rear of vehicle.
3
Lower head restraints.
4
Pull the seatback folding lever and fold the seatback forward.
Straps
Seatback folding
Seatback folding
lever
Third-row seat
access lever
4

Advertisement

Table of Contents
loading

Table of Contents