Table of Contents
Advertisement
Technical Manual & Parts Lists
Delivery
Check for damage upon delivery of the machine. Contact the delivery carrier and Priceless
Aviation Products immediately, if damage is noticed. Keep all shipping papers for Priceless Aviation
Products Service Representative.
Perform the following steps before starting the tug.
STEPS
1) Clean unit, removing dirt and debris accumulation.
2) Check the engine oil level. Refer to the Briggs & Straton Engine Manual.
3) Check the hydraulic oil levels.
4) Tighten any bolts that may have loosened and make sure all hair pins, cotter pins and clevis pins
are in place.
5) Install all safety shields and review safety precautions listed in this manual.
6) Fill the gas tank with fresh gasoline. Run the tug at half speed for 5 minutes, checking operation
of the steering, braking, scoop lift, and other functions.
7) Shut engine off and check for any fluid leaks and/or loose fittings. Adjust and tighten bolts
and/or fittings if necessary.
Parts and Service
Use Priceless Aviation Products replacement parts only. To obtain prompt, efficient service,
always provide the following information when ordering parts or requesting technical service:
Correct part number and description, as listed in the assembly drawings located in the back of
this manual.
Correct model number.
Correct serial number.
Parts orders placed before 12:00 pm (EST) will ship the same day, if the items are in stock.
Office Hours
Monday - Friday: 7:00 am - 5:00 pm (EST)
2
Contact Information
Priceless Aviation Products, LLC
362 Industrial Park Drive
Lawrenceville, Georgia 30046
USA: (770) 962-6188
Toll Free: (877) 206-5116
Fax: (770) 277-4141
Europe Tel +44 (0) 1794 518888
Fax +44 (0) 1794 518848
www.pricelessaviation.com
Advertisement
Table of Contents
