Product Description; Operation - Electrolux EHG60830 User Manual

18 electrolux
MANUFACTURER:
ELECTROLUX ITALIA S.p.A.
C.so Lino Zanussi, 30
33080 PORCIA (PN) - ITALIA

PRODUCT DESCRIPTION

Cooking surface layout
1
Control knobs
Symbol

OPERATION

Ignition of the burner
Warning! Be very careful when you
use open fire in kitchen environment.
Manufacturer decline any responsibility
in case misuse of the flame
Always light the burner before you put
cookware.
To light the burner:
1. Turn the control knob counterclockwise
to the maximum position (
push it down.
2. Keep the control knob pushed for ap-
proximately 5 seconds; this will let ther-
mocouple to warm up. If not, the gas
supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not
light, check if the crown and its cap are
in correct positions.
2
3
4
5
Description
no gas supply / off
position
ignition position /
maximum gas supply
) and
1 Cooktop
2 Semi-rapid burner
3 Triple Crown burner
4 Auxiliary burner
5 Control knobs
Symbol
1 Burner cap and crown
2 Thermocouple
3 Ignition candle
Description
minimum gas supply
1
2
3