HTC Legend Repair Manual page 3

•
Now you can carefully pry the screen assembly and motherboard from the back housing. It may take some time to
work the assembly out of place.
•
Once the screen assembly and motherboard have been removed, remove the 2 torx T6 screws located in figure
3. You can now remove the lower assembly.
•
Remove the plastic housing on the back side of the assembly by using a safe open pry tool to carefully unclip the
housing.
•
The motherboard will now be exposed. Use a safe open pry tool to release the 3 connectors located on the
motherboard. If the connection is a "jaw" connector, simply lift the lip and carefully slide out the cable.
•
Once the screen is completely released, you can take it out of the assembly.
Figure 2
Figure 3