Garmin GPS 175 Pilot's Manual page 128

Navigation
APPROACH PROCEDURES
APPROACH
DEPARTURE
SELECTING A
DEPARTURE
ARRIVAL
SELECTING AN
ARRIVAL
APPROACH
3-54
DESCRIPTION AND INSTRUCTIONS
A Departure Procedure (DP) is loaded at the departure
airport in the flight plan.
If the selected runway is RW10B, for example, it includes
runways 10L and 10R.
1. Tap PROC > Departure.
2. Confirm the airport is shown or tap Airport to select
an airport.
3. Tap Transition > select an arrival transition > Runway
> select the runway type > Load Departure.
To change a departure, tap Departure > a new departure.
To remove a departure, tap Remove Departure.
Published arrival procedures include Standard Terminal
Arrival (STAR).
If using Descent VNAV, verify that the altitudes for the
selected procedure match the charted altitudes and are
appropriate for the airframe type.
1. Tap PROC > Tap Arrival.
2. Confirm the airport is shown or tap Airport to select
an airport.
3. Tap Arrival > select an arrival type > Transition >
select an arrival transition.
Tap Runway > select the runway type > Load Arrival.
Loading alternate approaches during a missed approach
procedure is available. The GPS/GNX retains missed
approaches in the flight plan.
The SBAS approach uses the Channel ID key to select the
channel ID for the current destination. The channel ID for
the SBAS approach is available from an approved approach
chart. If there are duplicate numbers for a channel, a list is
available to select the precise approach.
GPS 175/GNX 375 Pilot's Guide 190-02207-02 Rev. 1