You need the outdoor unit address to use Energy Navigator. Configure the outdoor unit address in
advance (see the intelligent Touch Manager Installation Manual (EM11A016/EM11A018)).
For information on how the administrator can configure and use the function, refer to the
appropriate sections of the User Manual.
The remaining part of this manual provides the procedures for commissioning.
Configure the outdoor unit address
Configure the model type of the outdoor unit
Commissioning for Power Proportional Distribution
Configure the source from which to obtain the room
Configure the month when to start data collection
Configure an additional energy conversion type
* When necessary
Commissioning Manual (Energy Navigator Setup) EM11A028
Log into the service mode
temperature
DCM601A51 intelligent Touch Manager
See:
intelligent Touch Manager Installation
Manual (EM11A016/EM11A018)
Commissioning Manual
(EM11A021/EM11A022)
Commissioning Manual
(Supplementary Volume)
Commissioning for Power
Proportional Distribution
(EM11A027)
This manual
6