(2)
Touch the Modify button
(2)
to bring up the Room temperature settings window.
(4)
(3)
(5)
(3)
The Mgmt. point list box
provides a list of registered indoor unit management points.
Select your desired management point from this list, which shows management point names along
with their current settings. Specify whether to use the suction temperature or analogue input (Ai) as
the source of the room temperature by selecting either of the two radio buttons under Room
temperature settings (4).
If you have chosen Ai, touch the Modify button to bring up the Ai Selection window.
Commissioning Manual (Energy Navigator Setup) EM11A028
10
DCM601A51 intelligent Touch Manager