Page 1
Model : E-Light Pro/56 Model : E-Light Pro/40...
Page 2
1 - 2 4 - 6 6 - 8 9 - 10 10 - 11 SAFETY PRECAUTION Warning Installation and maintenance work shall only be performed by qualified persons, familiar with local code and regulation, and experienced with this type of appliance. All field wiring must be installed in accordance with the national wiring regulation.
Page 3
SAFETY PRECAUTION Disconnect from the main power supply before servicing the unit. DO NOT pull out the power cord when the power is ON. This may cause serious electrical shocks which may result in fire hazards. STOP using the ceiling fan when any abnormality or failure occurs. Immediately stop using the ceiling fan and switch off the power supply.
Page 4
Bolt x 2 Transmitter & Holder x 1 Battery x 2 TIMER ON...
Page 7
1. Insert the 2 pcs of AAA battery (provided) into the transmitter. 2. Mount the transmitter holder on the wall with the screws provided.
Page 8
TRANSMITTER LEARNING PROCESS The receiver & transmitter is pre-programmed in factory. If you wish to control 2 or more fans using 1 transmitter, the below steps is required. DO NOT PRESS ANY OTHER BUTTON ON THE TRANSMITTER DURING THIS PROCEDURE. a) Turn on the power supply (wall switch) to the fan.
Page 9
Last Memory Function The transmitter & receiver is incorporated with last memory function. It stores the last reading/setting on memory and when the fan is switch on again, the operation will be as the last memory/setting. EMERGENCY LIGHT USER GUIDE...
Page 12
More than 1m 1422mm (4’ 8”) - E-Light Pro/56 1016mm (3’ 4”) - E-Light Pro/40 If you need any technical assistance or faulty report, please contact our customer service centre at : Alpha Home Appliances Sdn. Bhd. (390258-H) Head Office : 6, Jalan Sungai Kayu Ara 32/37, Berjaya Park, Section 32, 40460 Shah Alam, Selangor.
Need help?
Do you have a question about the E-Light Pro/56 and is the answer not in the manual?
Questions and answers