weedingtech FoamStream M1200 User Manual page 6

Hide thumbs Also See for FoamStream M1200:
Table of Contents

Advertisement

M1200 – User manual – English (EU) – 01/03/2018 - ISSUE 2
Filters are fitted to the diesel, water and foam systems to
ensure supplies are kept clean and free from debris. These
needs to be checked daily (see section 5).
Access panels to the right and left-hand side of the M1200
can be opened with a key to allow access to filters, pipes
and hydraulic components. These panels can be easily
removed
for
maintenance
electronics is via a door on the front of the M1200 which can
be opened by a key.
The water tank (780 litres) can be either separate from the
unit or attached to it by bolts on the frame. There are two
hydraulic connections (water supply, water return), one
electrical connection (water sensor) and 13 bolts when the
tank is attached to the unit.
An automatic hose reel is located inside the unit to allow the
30 metres hose to be stowed safely when the M1200 is not
in use. The hose comes off the top of the reel and is
connected to the lance via a connector.
purposes.
Access
to
the
M1200
HEIGHT (mm)
WIDTH (mm)
DEPTH (mm)
1250 or 2120 (with tank)
WEIGHT (kg)
326 EMPTY, 400 FULL
WATER
FUEL
FOAMSTREAM
FOAMSTREAM – 22 LITRES
GENERATOR OIL
1.2 LITRES SAE 5W40
PUMP OIL
0.3 LITRES SAE 5W40
FLOW RATE
12 LITRES PER MINUTE
OPERATING
30 BAR ON HEAT UP, 12 BAR
PRESSURE
OPERATING
TEMPERATURE
PRESSURE
RELIEF VALVE
OVER
TEMPERATURE
CUT-OUT
GENERATOR
4.5 kVA – DIESEL POWERED
BOILER
95 kWh – DIESEL POWERED
1200
1206
780 LITRES
DIESEL – 52 LITRES
TRIGGER OPEN
95 – 110 °C
35 BAR
125 °C
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents