Download
Share
Print this page
  1. Manuals
  2. Brands
  3. weedingtech Manuals
  4. Water Heater
  5. FoamStream M1200
  6. Quick start-up manual

weedingtech FoamStream M1200 Quick Start-Up Manual

Hide thumbs Also See for FoamStream M1200:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
QUICK START-UP MANUAL
ENGLISH (EU) – 01/03/2018 – ISSUE 2

Advertisement

loading

Related Manuals for weedingtech FoamStream M1200

Summary of Contents for weedingtech FoamStream M1200

  • Page 1 QUICK START-UP MANUAL ENGLISH (EU) – 01/03/2018 – ISSUE 2...
  • Page 2 M1200 – Quick start-up manual – English (EU) – 01/03/2018 - ISSUE 2 Num. Description Control panel Lance Water tank Exhaust hood Hose reel orifice Forks entry Left cover panel Right cover panel Traffic lights Hot air extraction fan Figure 1 – Perspective view of the M1200...

  • Page 3: Pre-Start Checks

    M1200 – Quick start-up manual – English (EU) – 01/03/2018 - ISSUE 2 Prestart checks ✓ Generator engine oil level is correct ✓ Pump oil level is correct ✓ The lance, hose reel and hose are securely connected and free from damage THE FOLLOWING CHECKS MUST BE COMPLETED BEFORE ✓...

  • Page 4: Start Procedure

    M1200 – Quick start-up manual – English (EU) – 01/03/2018 - ISSUE 2 Start procedure ✓ Start the generator by turning the key (item ‘5’ in Figure 2) in a clockwise direction to position ‘B’, release to ✓ Complete pre-start checks (previous section) position ‘A’...
  • Page 5 M1200 – Quick start-up manual – English (EU) – 01/03/2018 - ISSUE 2 When bleeding the machine, the trigger must be ✓ Press ‘START’, the button turns green and the screen pushed to allow water to flow out of the lance. Failure to represented on Figure 6 will appear.
  • Page 6 M1200 – Quick start-up manual – English (EU) – 01/03/2018 - ISSUE 2 AFTER A COLD NIGHT (BELOW 0 DEGREES CELSIUS), LET THE GENERATOR RUN ALONE FOR 15 MINUTES TO WARM UP THE MACHINE BEFORE TURNING THE ISOLATOR TO POSITION A.

  • Page 7: Screen And Plc Navigation

    M1200 – Quick start-up manual – English (EU) – 01/03/2018 - ISSUE 2 Screen and PLC navigation Num. Description Return to main page When the M1200 is ready to start, the screen below will appear. Go to summary screen Purge Language selection Fault summary panel Maintenance mode...