Download
Share
Print this page
  1. Manuals
  2. Brands
  3. weedingtech Manuals
  4. Water Heater
  5. Foamstream M600
  6. Quick start up manual

weedingtech FoamStream M600 Quick Start Up Manual

Hide thumbs Also See for FoamStream M600:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual See also: User Manual
QUICK START-UP GUIDE
ENGLISH (EU) – 16/05/2018 – ISSUE 3

Advertisement

loading

Related Manuals for weedingtech FoamStream M600

Summary of Contents for weedingtech FoamStream M600

  • Page 1 QUICK START-UP GUIDE ENGLISH (EU) – 16/05/2018 – ISSUE 3...

  • Page 2: Safety Information

    Foamstream M600 – Quick start-up guide – English (EU) – 16/05/2018 - ISSUE 3 Fire and Burn Hazards Safety Information WARNING To ensure safety while operating the M600, please carefully • LPG and diesel are explosive and flammable. Always read the following information.
  • Page 3 Foamstream M600 – User manual – English (EU) –16/05/2018 - ISSUE 3 Num. Description Control Panel Generator Water tank Lance Hose reel orifice Water Filter Forks entrance Boiler exhaust flap Warning light Control panel access door Generator access door Top cover...

  • Page 4: Pre-Start Checks

    Foamstream M600 – User manual – English (EU) –16/05/2018 - ISSUE 3 Prestart checks ✓ Generator and boiler exhaust are secure and clear of debris and obstruction ✓ Fuel switch on generator is in the OFF position THE FOLLOWING CHECKS MUST BE COMPLETED BEFORE ✓...
  • Page 5 Foamstream M600 – User manual – English (EU) –16/05/2018 - ISSUE 3 Filling with foam and Diesel NEVER MIX FOAMSTREAM® CONCENTRATE WITH DIESEL. ONLY FILL FOAM TANK WITH FOAMSTREAM® CONCENTRATE. ✓ Open top cover and prop up with rod. ✓ To fill diesel tank, open valve cap (RED - LEFT) (item 1 Figure 2) and carefully pour diesel until the tank is full.

  • Page 6: Start Procedure

    Foamstream M600 – User manual – English (EU) –16/05/2018 - ISSUE 3 Start procedure Press the RESET button (blue button, item 3 in Figure ✓ 3), the FAULT indicator goes out and you should see the screen represented in Figure 4.
  • Page 7 Foamstream M600 – User manual – English (EU) –16/05/2018 - ISSUE 3 Figure 6 - Start screen of the PLC Figure 5 - Bleed screen of the PLC ✓ Press START, the button turns green and the screen If starting when water tank level is below water filter represented on Figure 7 will appear.
  • Page 8 Foamstream M600 – User manual – English (EU) –16/05/2018 - ISSUE 3 AFTER A COLD NIGHT (BELOW 0 DEGREES CELSIUS), LET THE GENERATOR RUN ALONE FOR 15 MINUTES TO WARM UP THE MACHINE BEFORE TURNING THE ISOLATOR TO POSITION A.

  • Page 9: Screen And Plc Navigation

    Foamstream M600 – User manual – English (EU) –16/05/2018 - ISSUE 3 Screen and PLC navigation When the M600 is ready to start, the screen below will Num. Description appear (same as Figure 6) Return to main page Go to summary screen...