Unitech TASHI MT380 User Manual page 18

11. Put finger on the sensor according to the
message shown on screen.
A pop-up window appears with verification
results: "Match" or "No match". Tap OK.
12. Tap Identify to find finger print id info.
Put finger on the sensor according to the
message shown on screen.
A pop-up window appears with verification
results: "Match found: slot 0 id '123'" or
"No match". Tap OK.
13. Under the Grab/GrabW tab, tap Grab/
GrabWindow to collect a finger print
image.
14. Under the Info tab, tap Get Module Info
to display the Finger Print module info.
Under the Type drop-down menu, select
all, internal, or external, then tap Get
Available Memory to display the Finger
Print Reader's memory.
12
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.