Gree Multi21 Series Owner's Manual page 9

OPERATION OF WIRELESS REMOTE CONTROLLER
REMOTE CONTROLLER OPERATIONS
The wireless remote controller is sleek, versatile and allows you to change room temperatures
and functions on your Multi21 Mini-Floor Console system from the palm of your hand. The
large LCD display and buttons make it easy-to-understand and easy-to-use.
The remote controller is set from factory to display temperatures in °F. If °C is desired, turn
the remote controller OFF with the ON/OFF button and then press "MODE" and " - " buttons
on the remote simultaneously for 5 seconds.
ON/OFF BUTTON
When the system is in OFF mode, the remote controller will
display the time and last room setpoint. When you press the
ON/OFF button, this indicator
unit will start in the last operating mode and room setpoint.
NOTE: If the ON/OFF button is pressed too soon after a
stop, the compressor will not start for 1 to 5 min. due to the
inherent protection against frequent compressor cycling.
SWING LOUVERS
Press the Swing Louver button to select 9 different vertical (up & down)
air discharge directions including Continuous Sweep. The Swing Louver
icon will be displayed. The airflow can be select from the pattern below:
no display
(louvers stops at current position)
• When selecting"
• When selecting"
down at maximum angle.
• When selecting"
in a fixed position.
at a fixed angle.
will be displayed and the
", the louver will continuously swing up and
", louver will swing up and down
", the louver will stay
ON Mode Display
Swing Louver Display
8