Gree Multi21 Series Owner's Manual page 11

OPERATION OF WIRELESS REMOTE CONTROLLER
TIMER SETTING
Timer-ON / Timer-OFF BUTTON
To set when you want the unit to turn On at the end of a selected
time period, use the button labeled "Timer-ON /Timer-OFF"on the
remote controller. Press this button to make the clock icon disappear,
replaced with the word "ON" (blinking). Press" + " and " - " buttons to
adjust timer setting 1 minute at a time. Press and hold" + " and " - "
button to set timer more quickly. Press"Timer-ON /Timer-OFF" button
again to confirm setting, and the word "ON" will stop blinking. To
cancel, press"Timer-ON /Timer-OFF" button again.
To set when you want the unit to turn Off at the end of a selected time period, use the
same button. Press this button to make the clock icon disappear, replaced with the word
"OFF" (blinking). Adjust settings the same as with "Timer-ON /Timer-OFF" settings.
NOTE: Under Timer On and Off status, you can set"Timer-ON /Timer-OFF"simultaneously.
Before setting timer, be sure to set clock to correct time.
TURBO MODE
The desired room setpoint can be achieved faster in TURBO
mode. After selecting the"HEAT"or"COOL" mode button,
push the"TURBO"button. The TURBO
displayed on the remote controller and the unit will run at an
ultra-high speed. To deactivate the feature, push the"TURBO"
button again. The unit will return to normal operation.
LIGHT BUTTON
Press this button to turn off display light on indoor unit.
Press again to turn it back on.
icon will be
Timer Setting ON/OFF
Turbo Mode Display
Light Display
10