Storage - ABB VD4 36 Installation And Service Instructions Manual

A
CIRCUIT-BREAKER
1
VD4 ... ... ...
CLASSIFICATION ... ... ...
3
SN ... ... ...
M MASS
Ur Ur
4
ELECTRIC DIAGRAM
FIG. ... ...
B
.. ... ... ...
5
-MO1 ... ... ... V
Made by ABB
Caption
A Circuit-breaker rating plate
B Operating mechanism rating plate
1 Type of apparatus
2 Symbols of compliance with Standards
3 Serial number
4 Circuit-breaker characteristics
5 Characteristics of the operating mechanism auxiliaries
Fig. 1
IEC 62271-100
CEI 17-1
PR. YEAR ......
... kV
... ... ... ...
OPERATING MECHANISM

3. Storage

When a period of storage is foreseen, our workshops can (on
2
request) provide suitable packing for the specified storage
conditions.
On receipt the apparatus must be carefully unpacked and
checked as described in Checking on receipt (chap. 2).
If immediate installation is not possible, the packing must be
replaced, using the original material supplied.
Insert packets of special hygroscopic substances inside
the packing, with at least one standard packet for piece of
apparatus.
Should the original packing not be available and immediate
installation is not possible, store in a covered, well-ventilated,
dry, dust-free, non-corrosive ambient, away from any easily
flammable materials and at a temperature between –5 °C and
+45 °C.
In any case, avoid any accidental impacts or positioning
which stresses the structure of the apparatus.
4