Data - FALEX 400 Operation And Maintenance Manual

3.3 Data

Data: The 'Data' screen is accessed from the 'Main'
screen or it will automatically appear at the
[Figure 44]
completion of a successful test. The 'Data' menu allows
the user to retrieve the data file from the last test whether
successfully completed or not.
NoTe: If the Falex 400 has had a power cycle since the
last test, data transfer cannot be performed.
The name of the last test run is on the top line on this
screen. This is the file that the first three buttons refer to
. The user can view the test data on the touch
[Figure 45]
screen, transfer the data from the PLC storage onto the
computer, print this report and/or copy files from the
touch screen to a USB device or Ethernet connection.
Complete data records of DP mmHg, heater tube tem-
perature and system pressure are taken every minute
during a test and are stored in the data file. To retrieve
the data file the operator needs to 'Transfer' the data file
and then 'Copy' the file to an external device. Data files
are saved in .csv format and can be viewed using ap-
propriate software.
Access
the data
Figure 44
Name of
data file
that View,
Transfer
and Print
refer to
Figure 45
How To Access
Test Data
Data File Name
Section 3: Software Operation
1. View: This initiates a display of the printout
information from the last run test. There are two
screens. The first 'View Data –General' screen
displays test information on the test
Press the forward arrow to advance to the "View
Data-Pressure" screen to see the DP readings
taken every 30 minutes during the test
Viewing Data
Figure 46
Page 1 - Test Information
Viewing Data
Figure 47
Page 2 - DP Values
28
.
[Figure 46]
.
[Figure 47]