HP Media Card Reader with PCI Card Installation Manual page 6

HP Media Card Reader with PCI Card
2. Reinstall the guide screws that were removed in the previous
step to one or both sides of the HP Media Card Reader. Refer
to the documentation included with your computer for proper
guide screw usage and instructions on installing a drive in a
3.5-inch drive bay.
3. If you are installing the HP Media Card Reader in a dc7600
Small Form Factor or dx7200 Slim Tower, install the 3.5-inch
drive bay bezel (358796-001) included in the kit for those
models. If you are installing the HP Media Card Reader in a
dx5150 Small Form Factor, install the 3.5-inch drive bay
bezel (316008-001) included in the kit for that model.
✎
If your computer model requires a 3.5-inch drive bay bezel that
was not included in the kit, go to
bezel.
6 www.hp.com
www.hp.com
to purchase a
Installation Guide