Sony DSC-U60 Operating Instructions (primary manual) Operating Instructions Manual page 67

Others
Symptom
Your camera does not work.
The power is on, but the
camera does not work.
You cannot identify an
indicator on the LCD screen.
The lens portion gets
fogged.
Cause
• The battery level is low. (The E indicator
appears.)
• The USB cable is connected.
• The built-in microcomputer is not working
properly.
—
• Moisture condensation has occurred.
Solution
p Charge the batteries (page 10).
p Disconnect the USB cable (pages 54 and 59).
p Remove the batteries, then install them again after about one
minute and turn on the camera. If the functions still do not work,
open the waterproof cover to press the RESET button using a
fine-tipped object, then close the cover and turn the power on
again (page 61). (If you press the RESET button, all settings
including the date and time are cleared.)
p Check the indicator (pages 83 and 84).
p Turn off the camera and leave it for about an hour at the room
temperature for the moisture to evaporate before use (page 75).
67