Sony DSC-U50 Operating Instructions (primary manual) Operating Instructions Manual page 73

PictBridge compliant printer
Symptom
You cannot connect your
camera to the printer.
You cannot print.
Printing was stopped.
You cannot attach a date to
an image.
Others
Symptom
Your camera does not work.
The power is on, but the
camera does not work.
You cannot identify an
indicator on the LCD screen.
The lens gets fogged.
Cause
• The printer is not PictBridge compliant.
• The printer is not ready to be connected.
• Your camera is not connected to the printer
correctly.
• Your camera is not connected to the printer.
• The power of the printer is off.
• You cannot print a movie.
• You disconnected the USB cable before the
mark disappeared.
• Your printer does not support this function.
Cause
• The battery level is low. (The E indicator
appears.)
• The USB cable is connected.
• The built-in microcomputer is not working
properly.
—
• Moisture condensation has occurred.
Solution
p Ask the printer manufacturer if the printer is PictBridge
compliant.
p Confirm that the printer is turned on and is ready to be
connected.
p When the preparations needed to make the connection between
the camera and the printer are finished, make the connection
(pages 42 and 43).
p Confirm that your camera is correctly connected to the printer
using the USB cable.
p Turn the printer on. For details, see the operation manual
supplied with the printer.
—
—
p Ask the printer manufacturer if the printer supports this
function.
Solution
p Charge the batteries (page 10).
p Disconnect the USB cable (pages 58 and 65).
p Remove the batteries, then install them again after about one
minute and turn on the camera. If the functions still do not work,
press the RESET button located on the bottom of the camera
a fine-tipped object, then turn the power on again (page 67). (If
you press the RESET button, all settings including the date and
time are cleared.)
p Check the indicator (pages 86 and 87).
p Turn off the camera and leave it for about an hour at the room
temperature for the moisture to evaporate before use (page 80).
using
73