Using The Self-Timer - Sony DSC-U50 Operating Instructions (primary manual) Operating Instructions Manual

LCD screen display during
shooting
You can use [DISPLAY] under
MENU and the control buttons v/V to turn
the display on and off. This is useful when
recording under conditions where it is
difficult to check the image on the LCD
screen.
When [DISPLAY] is [ON]
All indicators are displayed.
2M 2M 2M
When [DISPLAY] is [OFF]
Warning messages, etc. are displayed.
• For detailed descriptions of the indicators, see
page 86.
• Indicators on the LCD screen are not recorded.
22

Using the self-timer

with
[ ]
1
, Set the mode switch to
101
10
press MENU.
The menu appears on the LCD screen.
• You can also carry out this operation when the
mode switch is set to
RETURN
SIZE BURST
•
2M 2M 2M
FOCUS AUTO
SELFTIMER
OFF
WHITE BAL AUTO
MENU
2
, Select [
, and
.
• When the mode switch is set to
[
RETURN
SIZE BURST
•
FOCUS
SELFTIMER
WHITE BAL
EXEC
] with the control
button v, then press EXEC.
Select [SELFTIMER] with the
control buttons v/V, then
press EXEC.
, select
] with the control button v.
2M 2M 2M
AUTO
OFF
AUTO
/