Sony DSC-U40 Operating Instructions (primary manual) Operating Instructions Manual page 32

3
, Select [ BURST] or [
2M 2M 2M
BURST] with the control
buttons v/V, then press EXEC.
The image size used for burst shooting is
set.
Press MENU so that the menu disappears
from the LCD screen.
• For details on the image size, see page 19.
32
SIZE • BURST
2M
2M 2M 2M
VGA
VGA VGA VGA
BURST
2M 2M 2M
BURST
VGA VGA VGA
/
EXEC
4
, Press the shutter button
VGA VGA VGA
halfway down, then hold the
shutter button fully down.
Up to two images are recorded with 2M or
up to ten images are recorded with VGA
while you hold down the shutter button.
• If you release the shutter button in the middle of
shooting, shooting will stop at that point. Only
the images that were shot while the shutter
button was held down are recorded.
101
VGA VGA 2.0M
10