Auto Power Off Function; How To Use The Buttons; Setting The Date And Time - Sony DSC-U40 Operating Instructions (primary manual) Operating Instructions Manual

Auto power-off function
If you do not operate the camera for about
three minutes, the camera turns off
automatically to prevent wearing down the
batteries.
However, the auto power-off function will
not operate when the camera is connected to
a computer with the USB cable.
How to use the
buttons
To change the current settings of the
camera, bring up the menu, and use the
control buttons to make the changes.
For each item, press MENU to display the
menu and press the control buttons v/V to
select the desired value, then press EXEC to
make the setting.
Press MENU, then the menu disappears
from the LCD screen.
Setting the date
and time
POWER
Control
buttons
/
EXEC
MENU
1
, Slide the lens cover in the
direction of the arrow or press
POWER to turn on the power.
The POWER lamp (green) lights up and the
DATE NOTATION screen appears on the
LCD screen.
• To change the date and time, press MENU and
select [DATE&TIME SET] in [CLOCK SET]
] (page 80), then perform step 3.
under [
When the setting is complete, press MENU so
that the CLOCK SET screen disappears from
the LCD screen.
• This operation is available no matter what
position the mode switch is in.
DATE NOTATION
2003 1 1
12:00:00
AM
Y / M / D
M / D / Y
D / M / Y
15