Underwater Sweep Panorama - Sony DSC-T99 Cyber-shot&reg Handbook

Underwater Sweep Panorama

When the camera is installed in a housing (such as the Marine Pack), the camera takes multiple
shots during a sweep, and allows you to create a panoramic image from composite images.
1 Lower the lens cover to switch to shooting mode.
2 t (Settings) t
t [Housing] t [On]
3 Put the camera in the housing.
4 (REC Mode) t
Panorama)
5 Align the camera with the end of the subject to be
shot and press the shutter button.
6 Pan the camera to the end of the guide,
following the indication on the LCD
screen.
Notes
• If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the
composite image. If this happens, move the camera faster to record a full panoramic image.
• Since several images are stitched together, the stitched part will not be recorded smoothly.
• Under low light conditions, panoramic images may be blurred or the shooting may not be successful.
• Under lights that flicker, the brightness or color of the combined image will not always be the same.
• When the whole angle of panoramic shooting and the AE/AF locked angle are very different in
brightness, color and focus, the shooting will not be successful. If this happens, change AE/AF locked
angle and shoot again.
• Underwater Sweep Panorama is not suitable for the following situations:
– When objects are too close to the camera
– Images with little contrast
– Images with constant change
• You cannot create panoramic images in the following situations:
– You pan the camera too quickly or too slowly.
– There is too much camera shake.
(Main Settings)
(Underwater Sweep
Guidance
bar
This part will not be taken
32 GB