Radioddity GD-73 Series User Manual page 46

English user manual - Radioddity GD-73
By clicking on the "Add" button, you can now add another channel.
Here is a brief explanation of the different fields you can customise for each channel:
Digital+Analog
Mode
Channel name
Receive Freq
Transmit Freq.
Channel Space
Power
Scan List
Talk Around
Access Policy
RX Only
Auto Start Scan
PTT Template
Choose between "analogue" and "digital"
Name of the channel – this needs to be unique.
The receive frequency in MHz
The transmit frequency in MHz
Select the transmit / receive bandwidth here. In digital
mode this is fixed at 12.5 kHz
Selection of RF output power (cannot be changed for
PMR)
Select what scan list to scan when a scan is initiated on
this channel.
Enables the ability to swap transmit and receive
frequencies
Also known as 'admit criteria' this selects how a
transmission is allowed to be sent
Sets the channel to receive only, transmit is disabled.
As soon as this
automatically starts with the scan list specified under
"Scan List"
For an analogue channel, the PTT template to be used
can be specified here.
channel is selected,
Page 45 of 56
v1.0
scanning