Backlight; Freqdis; Startup Display - Radioddity GD-73 Series User Manual

English user manual - Radioddity GD-73

Backlight

The backlighting for the LCD can be turned on or off as you desire.
In the function menu:
1. Press the MENU
to select the "Settings" sub-menu and confirm your selection by pressing the
MENU button.
2. Use the and

selection by pressing the
3. Use the and

selection by pressing the
4. Now use the

keep the backlight on for one of the values of 5, 10, 15, 30 or 60 seconds of
backlight operation after the last keypress was registered; confirm your
selection by pressing the
5. Finally press ESC
about 10 seconds.

FreqDis

Depending on the situation, it may be useful to display the channel name or the
reception frequency stored for the selected channel.
In the function menu:
1. Press the MENU
to select the "Settings" sub-menu and confirm your selection by pressing the
MENU button.
2. Use the and

selection by pressing the
3. Use the and

by pressing the
4. Now use the

frequency or "OFF" to show the channel by its name; confirm your selection by
pressing the MENU
5. Finally press ESC
about 10 seconds.

Startup display

After turning on the radio, a graphically animated image is displayed. This image can
be replaced / supplemented with the CPS by a static, two-line customisable text
banner.
In the function menu:
1. Press the MENU
to select the "Settings" sub-menu and confirm your selection by pressing the
MENU button.
2. Use the and

selection by pressing the
key to enter the function menu, then use the
buttons to select the sub-menu "Others" and confirm

MENU button again.
buttons to select the option "BackLight" and confirm

MENU button again.
and buttons to select the one of the "Long Open" options to

MENU button again.
button several times to return to the main display, or wait
key to enter the function menu, then use the
buttons to select the sub-menu "Others" and confirm

MENU button again.
buttons to select the option "FreqDis" and confirm selection

MENU button again.
and buttons to select either "ON" to display the channel

button again.
button several times to return to the main display, or wait
key to enter the function menu, then use the
buttons to select the sub-menu "Others" and confirm

MENU button again.
v1.0
or buttons
 
or buttons
 
or buttons
 
Page 34 of 56