Main Settings - Main Settings 2; Usb Connect; Video Out; Component - Sony DSC-T2 Cyber-shot&reg Handbook

Settings
Main Settings — Main Settings 2
The default settings are marked with

USB Connect

Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable (Only when using the internal memory).
PictBridge
Mass Storage
Auto

COMPONENT

Selects the video signal output type from SD and HD(1080i), according to the TV connected
(page 88).
HD(1080i)
SD

Video Out

Sets the video signal output according to the TV color system of the connected video
equipment. The TV color systems differ depending on the country and region. To view images
on a TV screen, check the TV color system of the country or region of use (page 89).
NTSC
PAL
80
For details on the operation 1 page 74
.
Connects the camera to a PictBridge compliant printer
(page 102). When you connect the camera to a computer, the
copy wizard starts automatically, and the images in the
internal memory on the camera are copied to the computer.
(with Windows XP/Vista)
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 96).
The camera recognizes automatically and sets up
communication with a computer or PictBridge compliant
printer (pages 96 and 102).
• If you cannot connect the camera to a PictBridge compliant
printer with the [Auto] setting, select [PictBridge].
• If you cannot connect the camera to a computer or a USB device
with the [Auto] setting, select [Mass Storage].
Select this item to connect the camera to a 1080i-capable
High Definition TV.
Select this item to connect the camera to a TV that is not
compatible with an HD(1080i) signal.
Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
Sets the video output signal to PAL mode (e.g., for Europe).