How to Replace Hard Disk Backplane for 8 bay/5 bay DiskStation
Release the screw on top of the upper metal frame (Marked by the red
circles). (Fig. 27)
Upper Metal Frame Set
Release the four (4) screws (Marked by the red circles) to remove the
defective HDD backplane from the two sets of metal frame. (Fig. 28)
Metal Frame Set
Date: 2014/4/11
Issued by: Hardware Development Group, Synology
Defective HDD Backplane
– SATA Connector Side
Fig. 27
Defective HDD Backplane
– SATA Connector Side
Fig. 28
®
Inc.
PSU Cable
Connector
Page 18 of 39