Selecting Still Images To Print (Print) - Sony DSC-P20 Operating Instructions (primary manual) Operating Instructions Manual

Selecting still images
to print (PRINT)
Mode dial:
You can mark a print mark on still
images recorded with your camera.
This mark is convenient when you
have images printed at a shop that
conforms with the DPOF (Digital Print
Order Format) standard.
.
In single-image or triple-
image mode
3
2,4
1
Set the mode dial to
2
In single-image mode
Display the image you want to
print with b/B.
In triple-image mode
Press the zoom W button twice in
the single-image mode to turn to
the triple-image mode.
Display the image you want to
print with b/B.
3
Press MENU.
The menu appears.
4
Select [PRINT] with b/B in
single-image mode, or with
v/V in triple-image mode,
then press z.
The (print) mark is marked on
the displayed image (or the
middle-positioned image in triple-
image mode).
62
To unmark the print mark
Press z again in step 4.
disappears.
In index mode
2,6
3–5,7
1
Set the mode dial to
display the index screen with
1
the zoom W button.
2
Press MENU.
W
The menu appears.
3
Select [PRINT] with b/B, then
press z.
4
Select [SELECT] with b/B,
.
then press z.
When marking the
cannot select [ALL].
The frame of the selected image
turns green.
5
Select the images to be
marked with the control
button, then press z.
To cancel, press z again.
Repeat this step to select other
images. The
the selected image.
6
Press MENU.
The menu appears.
7
Select [OK] with b/B, then
press z.
mark appears on
SET MENU TO NEXT
mark
1
W
, then
mark, you