5
Set the numeric value with v/V on the
control button, then press the center z to
enter it.
After entering the number, v/V moves to the next
item.
If you selected [D/M/Y] in step 3, set the time on a
24-hour cycle.
6
Select [OK] with B on the control button,
then press the center z at the desired
moment to begin clock movement.
The date and time are entered.
To cancel the date and time setting
Select [CANCEL] with v/V/b/B on the control button, then press the center z.
Note
If the rechargeable button battery is ever fully discharged (page 68), the CLOCK SET screen will
appear again. When this happens, reset the date and time by starting from step 3 above.
16
CLOCK SET
Y / M / D
M / D / Y
D / M / Y
2001 /
7
/ 1
12
:
00
OK
AM
CANCEL
OK
CLOCK SET
Y / M / D
M / D / Y
D / M / Y
2001 /
/ 4
10
:
30
OK
7
PM
CANCEL
OK
Need help?
Do you have a question about the DSC-P20 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers