Advertisement
Step 7
QR18
The header assembly is made up
of two pieces. The door header as-
sembly is made up of two pieces.
The illustrations below show the
proper overall length for the header/
door header assembly. Proceed as
follows:
1
Place the outer header as shown.
Snap the main header over the outer
header. See the illustration for the
proper overall length of the header
assembly.
2
Place the outer door header as
shown. Snap the main door header
over the outer door header. See
the illustration for the proper overall
length of the door header assembly.
3
Double check the length of each.
The header/door header combo re-
inforces the front wall and roof. It is
made up of two assemblies.
4
Positioning the door header as
shown, attach the header to the door
header using 13 screws along entire
length. Set this piece aside for later
use.
Header Assembly
Door Header Assembly
Parts Needed For
Header/Door Header
Assembly
Header Assembly
Door Header Assembly
9947
END VIEW
9945
Header Assembly
18
10184 Main Door Header (1)
9947 Outer Door Header (1)
9945 Main Header (1)
9889 Outer Header (1)
9889
10184
STEP
2
Door Header Assembly
STEP
1
STEP
3
STEP
4
Advertisement
